X10 Wireless Technology Double Oven IN49A User Manual

SETUP  
INSTRUCTIONS  
Setting Up XRay Vision with Multiple Cameras  
Connect the Firecracker Computer Interface  
The Computer Interface  
(model CM17A) uses  
wireless signals to transmit  
X10 control commands from  
the computer to the  
transceiver module included in the kit.  
Your X10 multi-camera system allows you to control X10  
Connect the Interface directly to your  
XCam2™ cameras from your PC and vieweach camera from  
PC's serial port. If there is already a  
the XRay Vision™ software. Follow these instructions to set  
up the necessary hardware and software.  
device connected to this port, unplug  
it, connect the Computer Interface, and  
then plug the other device into the connector on the  
Installing the XRay Vision Software  
CM17A. Important: Do not plug your mouse into the  
Before you connect the Video to USB Converter  
CM17A!  
(model VA10A) you must first install the drivers  
and XRay Vision Software. First, download the  
Configure Your Cameras in XRay Vision  
XRay Vision server software from X10.com at:  
Run XRay Vision. Right click in the program  
window and choose "Settings" then  
"Preferences" from the pop-up menu. Click on  
the "Cameras" tab in the configuration window.  
Next, run the Server installation application. Select the directory  
Click on the "Add" button to create an entry  
where XRay Vision will be installed and decide how you want  
for a camera. Click into the "Camera Code" box and enter  
XRay Vision listed on your Windows Start menu. After that,  
the House and Unit code for this camera. Make sure to  
the XRay Vision installation program will automatically finish.  
enter the letter and number without a space between  
You are now ready to set up the Video to USB Adapter.  
them. In the "Comment" box you can type a description  
or name for this camera. Repeat these steps for all the  
Connecting the USB Video Capture Adapter  
cameras you set up earlier.  
When the installation program instructs you to, plug  
the Video to USB Converter connector into a USB  
You are now ready to control your cameras from XRay  
port on your computer. The computer will recognize  
Vision. Right click in the XRV window and choose  
that new hardware has been installed and complete  
"Camera." You will be able to select from your different  
the installation.  
cameras, or tell XRV to automatically switch between all  
of them.  
Installing XRay Vision Remote Viewer  
After you have installed the XRay Vision server,  
you can use the XRay Vision remote viewer  
look at your images from any PC connected  
to the Internet. Once again you need to  
download the software from:  
Set Up the Transceiver Module  
Make sure you have connected the Transceiver  
(model TM751) to a nearby power outlet. The  
This time choose the remote software. Run the file Remote  
outlet you use should not be too close to the back  
installation application and follow the installation  
of your PC, as your PC may create some electrical  
instructions. You are now ready to connect to your XRay  
noise that could reduce the range of the transceiver.  
Vision server and download images.  
Set the House Code (letter dial) on the Transceiver to the  
letter you will use for your cameras.  
For more help, see:  
Connect the Video Receiver to the Video  
Capture Adapter  
Plug the yellow video plug on  
the supplied cable into the Video  
Out jack on the VR30A. Connect  
the other end of the cable to the  
yellow Video In jack on the Video Capture  
Adapter. Plug the PR30A power supply into  
any 120V AC outlet. Plug the power output  
of the PR30A into the DC 12V plug on the  
VR30A. Make sure the Channel switch on  
the underside of the VR30A should be set  
to the same letter as that on the XCam2.  
MODEL  
NUMBER:  
IN49A  
© Copyright 2000 X10 Wireless Technology, Inc.  
 

Westinghouse eBook Reader 37W1 User Manual
Whirlpool Air Conditioner 3PACH21DD0 User Manual
Whirlpool Dishwasher 431 User Manual
Wilton Saw Miter Band Saw User Manual
Wolf Fondue Maker CMJ24 User Manual
Woodstock Grinder M1104 User Manual
Yamaha Speaker 900SW User Manual
Zanussi Oven ZDF867X User Manual
Zanussi Refrigerator SL1420 T User Manual
Zanussi Refrigerator Z918 8R User Manual